Quadruped Robot Development

Overview

This skill provides tools and guidance for developing quadruped robots, including motor control, sensor data processing, locomotion patterns, and debugging workflows. Target platforms include Unitree Go1, ANYmal, and custom four-legged robots.

机器人名称: 太玄照业 - The virtual quadruped robot you're controlling

Core Capabilities

1. Motor Control

Control individual motors or coordinated multi-motor commands for gait generation.

Typical operations:

• - Set motor position/velocity/force
• Read motor telemetry (temperature, voltage, errors)
• Configure motor parameters (PID gains, limits)
• Emergency stop and safety protocols

2. Sensor Data Processing

Handle sensor inputs from IMUs, joint encoders, and environmental sensors.

Typical operations:

• - Read IMU data (acceleration, gyro, orientation)
• Process encoder data for joint position/velocity
• Temperature and voltage monitoring
• Sensor fusion for state estimation

3. Locomotion Patterns

Implement and tune walking, running, and other gaits.

Typical operations:

• - Stance phase planning
• Swing phase kinematics
• High-speed running stabilization
• Gait transition logic

4. Debugging & Diagnostics

Monitor system health and debug communication issues.

Typical operations:

• - Real-time motor telemetry display
• IMU data visualization
• Communication protocol debugging
• System status reports

Quick Start

Basic Motor Control

CODEBLOCK0

IMU Data Reading

CODEBLOCK1

Walking Gait

CODEBLOCK2

Virtual Robot Control

Use the simulator to test code before hardware connection:

CODEBLOCK3python
from gait_generator import QuadrupedGaitGenerator, GaitType

generator = QuadrupedGaitGenerator()

Generate trot gait

Generate run gait with flight phase

Generate gallop gait

Export to JSON for robot execution

print(f"Motion exported to: {json_path}")

### Create Motion Sequences

Combine multiple gait patterns:

exporter = MotionExporter()

Create sequence: stand → walk → run → stand

Generate and export

## Resource Structure

### scripts/
Motor control utilities and sensor reading scripts.

**Available scripts:**
- `motor_control.py` - Motor initialization, control, and status reading
- `imu_reader.py` - IMU data acquisition and formatting
- `sim_state.py` - Virtual robot state simulation
- `sim_control.py` - Virtual robot interactive control
- `gait_generator.py` - Quadruped gait pattern generation
- `motion_export.py` - Motion trajectory export (JSON, CSV)
- `encoder_reader.py` - Joint encoder data processing (预留)
- `telemetry_monitor.py` - Real-time system monitoring dashboard (预留)

### references/
Technical documentation for sensor data formats, motion models, and protocol details.

**Available references:**
- `motor_protocol.md` - Motor command protocol specification
- `imu_format.md` - IMU data format and coordinate frames
- `motion_kinematics.md` - Inverse kinematics for leg movements

## Best Practices

### Communication Protocol

Always check connection status before sending commands. Use timeout values appropriate for your hardware.

Example: Safe motor command pattern

robot.motor[1].set_position(45.0)
status = robot.motor[1].get_status()
except Exception as e:
print(f"Error: {e}")
robot.emergency_stop()
finally:
robot.disconnect()

### Safety First

- Always enable motors before attempting motion
- Set safe position limits before running gaits
- Monitor temperature and error states during operation
- Implement emergency stop capability

### Debugging Tips

1. **Communication Issues**: Check baud rate and cable connections first
2. **Motor Errors**: Check for overheating, overcurrent, or cable breaks
3. **Poor Gait Performance**: Check sensor calibration and PID tuning
4. **Unexpected Motion**: Verify gait parameters and ensure motors are enabled

## Common Tasks

### Task 1: Calibrate Sensors

Use the calibration script

### Task 2: Test Motor Control

Move individual motors in test mode

### Task 3: Monitor System Telemetry

Real-time monitoring (requires Python GUI or serial console)

### Task 4: Generate Motion Patterns

Create and save a motion profile

### Task 5: Virtual Robot Simulation

Before connecting to real hardware, test with the virtual simulator:

Interactive control (press keys to change gaits)

Run automatic animation

Custom simulation parameters

**Virtual robot commands:**
- `g` - Walk gait
- `r` - Run gait
- `t` - Trot gait
- `c` - Crawl gait
- `s` - Static pose
- `S` - Stretch pose
- `q` - Quit

### Task 6: Generate Motion Patterns

Create and export gait patterns for real robot execution:

Generate walking gait and export to JSON

Export to CSV format

Generate and save motion sequence

Troubleshooting

Motor not responding:

• - Check cable connections and power supply
• Verify baud rate matches robot configuration
• Ensure motors are enabled (not in error state)

Unstable gait:

• - Check sensor calibration
• Tune PID gains (start with conservative values)
• Verify IMU and encoder synchronization

Connection drops:

• - Check for USB/electrical interference
• Try different USB cable or port
• Reduce baud rate if communication errors occur